Geometric Dimensioning and Tolerancing in Design through Manufacturing
Date : 21 to 22 April, 2020
Venue : Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon
 
INTRODUCTION
 

Geometric Dimensioning and Tolerancing (GD&T) system eliminates ambiguities in engineering drawings and brings out the designer's intent very clearly. It ensures seamless communication between design, engineering, manufacturing and quality teams across the entire organization enabling them to work in a concurrent engineering environment. Application of GD&T system helps to reduce the manufacturing and inspection costs drastically.

Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organising a 2 day training programme on "Geometric Dimensioning and Tolerancing (GD&T) in Design through Manufacturing" on 21 - 22 April 2020 at Gurgaon. This programme will focus on understanding the system of GD&T and the methods of applying it in real time designs and will be supported by examples and exercises.

FOCUS AREAS
 
KEY TAKE AWAYS
  • Tolerance, types of tolerances, why tolerance is required, and how tolerance is decided
  • History, Introduction and understanding the need for GD&T
  • Fundamental rules of GD&T per ASME. Coordinate VS geometric tolerancing
  • Definitions of Terms and Symbols, FOS,FCF,DRF, Rule#1 or Taylor principle
  • Definition of datums' and DOF restrained by primary, secondary and tertiary datums
  • Selection of datums based on design / manufacturing / Inspection requirements
  • Wooden/plastic prototypes: Part/assy prototypes used for effective training
  • Form and orientation tolerances and applications
  • Location, runout and profile tolerances and applications
  • Tolerance concepts, MMC / LMC / RFS and their applications
  • Calculation of bonus tolerance per MMC / LMC
  • Inspection methods and Animations for form tolerances and important concepts
  • Exercises throughout the work shop, over 35 nos.
 

After undergoing the programme, the participants will be able to -

  • Understand the concepts of GD&T features and correctly interpret GD&T symbols in Engineering Drawings
  • Learn about using tolerances at RFS, MMC and LMC conditions and Calculate Bonus tolerance
  • Gain a practical insight into inspection of GD&T features using conventional methods, Co-ordinate Measuring Machine and functional gauges
  • Implement GD&T controls for a new project with proper selection of datum features
     
PARTICIPATION FEE

Rs. 8500/-
+18% GST

IMTMA Members / Micro Companies

Rs. 9500/-
+18% GST

IMTMA Non Members/ Others

Rs. 4750/-
+18% GST

Educational Institutions / Students

Rs. 8075/-
+18% GST

5 % IMTMA Members / Micro Companies

Rs. 9025/-
+18% GST

5 % IMTMA Non Members/ Others

Rs. 7650/-
+18% GST

10 % IMTMA Members / Micro Companies

Rs. 8550/-
+18% GST

10 % IMTMA Non Members/ Others

select * from pms_discounts where di_id=

You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1