Fundamentals of Injection Mould Design

Date : 19 to 23 January, 2021

Time : 1000 Hrs to 1300 Hrs ( Online Mode )

INTRODUCTION

Plastic parts are integral to various types of products these days in every perceivable sector. Demand for lighter and robust products has pushed the need for usage of plastics wherever possible. Depending on the plastics material to be used and its field usage, it is important to choose the right moulding process for manufacturing the part in the most efficient and cost effective method.

Out of the various moulding techniques, Injection Moulding is the most widely used for large scale production of high quality plastic parts. Therefore, Injection Mould Design assumes great importance in realizing defect-free parts using various plastic materials in required volumes. Having a defect free mould ensures speed and quality remain constant during manufacturing. In order to make such a mould, it is important to understand the design considerations that a mould engineer encounters during the design process.

Keeping this in view, IMTMA is organizing a 5 day programme on Fundamentals of Injection Mould design.

FOCUS AREAS		KEY TAKE AWAYS
Introduction to plastic materials Thermoset plastics Thermoplastics Shrinkage calculations Examples of different material applications Review of Injection Moulding process Design fundamentals of injection moulds Selection of parting surface Materials for mould construction, Core & cavity Guiding elements Ejector system, sprue puller, sprue bush Register ring / locating ring Feed system selection Types of runners and gates Ejection system selection Types of ejector grids and ejection systems Cooling system selection Cooling systems for various parts of moulds Water connections and seals Fundamentals of side core and side cavity moulds Design requirements of side core and cavity Methods of actuation Defects and remedies in moulding process Factors influencing defects Types of defects and remedies Mould design calculations Tonnage calculation, shrinkage calculation and cycle time for moulding Exercise on sample mould design and development Demonstration on usage of CAD modeling software for mould design		Understand the different plastic materials and their properties Understand the various elements of an injection mould Understand the design fundamentals of an injection mould Calculate the tonnage, shrinkage calculation and estimate cycle time Go through a complete case study on mould design & development

Fee Per Participant (Per Login)

Rs. 9000/-
+18% GST

IMTMA Members/ Micro Companies/ Individuals/ Educational Institutions / Students/ IMTMA Non Members/ Others

USD 270/-

Overseas Participants

Faculty

The program shall be delivered by Mr Joseph Abraham, a professional with more than 38 years of experience in Tool Designing & Manufacturing, Plastic injection Moulding, Training, Quality Management and Product design & Development. He worked as a Vice-Principal with NTTF. He has worked as a Tool Room Manager with several organizations such Balda Solutions, Malaysia, BPL Tool room, Bangalore and Tool Product Singapore. He currently provides training and tooling consultancy to several small scale industries.

For Registration Contact

Mary George
Programme Coordinator
9880569034
mary@imtma.in

Contact Address

INDIAN MACHINE TOOL MANUFACTURERS' ASSOCIATION
Plot 249F, Phase IV, Udyog vihar,Sector - 18,
Gurgaon - 122015

Tata no- +91-124-6463101
Tel : 0124 4014101 - 04
Fax : +91-124-4014108

REGISTRATION : Prior registration with an online advance payment is must. Number of participants is limited and will be accepted on ‘First Come First Serve’ basis. A Certificate of participation will be issued to participants.