+919886331231       info@imtmatraining.in        Members Login

Defects analysis and Trouble shooting of Diecast (PDC) parts


Focus Areas

  • Recap of PDC process – Types, applications
  • Defects in PDC parts – What, Why and How?
    • Surface defects
    • Laminations
    • Gas porosity
    • Blisters
    • Flow porosity
    • Shrink porosity
    • Heat Sinks
    • Leakers
    • Erosion / cavitation etc
    • Bending / warping etc.
  • Case studies from Industry
  • Defect Analysis and elimination
  • DFM - How product design prevents and / or eliminates some of the defects.

Background

High pressure die casting is often the process of choice because of its cost effectiveness and superior quality. The process produces components that have tight dimensional tolerance, good and consistent surface finish and near net shape. This enables manufacturers to make cost-effective small volume runs and is also cost competitive for large production runs. Aluminium die cast components have the property of being very light weight with significant mechanical properties and are used extensively in the automotive industry.
However, defects are the real challenges for any die casting industry and the quality of a foundry can be increased by minimizing the casting defects during production. Industry’s margin (profit) lies in rejected parts! Hence all the casting industries have a need address these issues on priority.
Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organising 2 day programme “Defects Analysis and Trouble shooting of Die Cast (PDC) parts”.

Key Takeaways

  • Identify Die-casting defects
  • Understand root cause of defects
  • Procedures for controlling defects
  • Application of the right problem solving tools
  • How to implement with sustained gains
  • Horizontal deployment across similar parts
  • Standardising the implemented method and change in Control plan
  • Understand the importance of involving die designers during product design.

Enquire About This Programme




Our Training Centres


BENGALURU

IMTMA Technology Centre
(BIEC)10th Mile,Tumkur Road, Madavara
Bengaluru - 562123


Email : info@imtmatraining.in

Phone : +91 80 66246600

GURUGRAM

IMTMA Technology Centre
Plot no. 249 F, Phase IV, Udyog vihar Sector - 18, Gurugram - 122015


Email : info@imtmatraining.in

Phone : +91 124 4014101

PUNE

IMTMA Technology Centre
12/5, D-1 Block MIDC Chinchwad
Pune - 411019


Email : info@imtmatraining.in

Phone : +91 7066030531


Newsletter

Subscribe to our newsletter now. Get the latest updates at IMTMA Training & from across the Industry.


Copyright © 2022 IMTMA. All Rights Reserved.

  Facebook   Twitter   Linkedin   Google Play   Apple Store   Get in touch
Our expert will get back to you as soon as he is free