IMTMA Training Centre

Free Webinars

November, 2021

Webinar on “Core Tools of Quality – A Structured Project Management Approach to Ensure QCD”

Date : 30 November, 2021
Time : 1100 - 1200 Hrs

The Core tools of quality are five fundamental building blocks of a Quality management system that are used throughout a product’s lifecycle, from development and to ensure their sustainability until end-of-life. to production and to delivery. While this is mandatory in the Automotive domain, adoption of the same methods in the non-automotive domain could become a standard requirement in the future in anticipating the obstacles & overcoming those through preventive actions to consistently produce the right products on time.

Keeping this in mind, IMTMA is conducting a free webinar on ‘Core tools of quality – A structured project management approach to ensure QCD’

Click here to register and get the webinar joining link instantly

Faculty : Mr. M. C. Ramakrishnan, Former Vice President -Quality, Bosch Limited.

Mr. M. C. Ramakrishnan is an industry expert with over 40 years of experience in the field of quality tools like Six Sigma, SPC, MSA, Poka - Yoke etc. He is a trained ISO 9001 and TS 16949 auditor, trained six sigma black belt as well as an FMEA moderator. He has championed a number of Quality Improvement projects at Bosch. He was associated in Bosch’s campaign and pursuit for 5S, Poka Yoke, SPC, MSA & TPM initiatives

December, 2021

Webinar on “Significance of ISO/IEC 17025 - Laboratory Management Systems and NABL Criteria”

Date : 04 December, 2021
Time : 1100 - 1200 Hrs

Laboratories providing testing, sampling and calibration need to demonstrate that they operate competently and generate reliable results, thereby promoting confidence in their work. This brings in the need for Accreditation under ISO/IEC 17025, which is a sure way to provide assurance of the quality and authenticity to the test results provided by laboratories.

Keeping this in mind, IMTMA is conducting a free webinar to Highlight the Significance of ISO/IEC 17025.

Click here to register and get the webinar joining link instantly

Faculty : Mr M G Sathyendra

Mr. Sathyendra has been engaged into domestic & international certification for the last 40 years. He held senior positions in organizations like BIS, CSA International, Intertek, etc., He is engaged in Consultancy & Training activities for the last more than 8 years and had been associated with many certification agencies for third party inspections. He is also a trainer for ISO13485 for medical devices , ISO/IEC 17025 for labs and ISO/IEC 17020 for inspection agencies for FICCI, Quality forum etc . He was the Chairman of the quality cell for IEEMA & Secretary for ISLE Karnataka, past assessor NABL and a technical expert for NABCB.

(Seats are limited and confirmation is subject to availability of seats.)

About IMTMA Training

The training programmes by the Indian Machine Tool Manufacturers’ Association is a sincere effort towards the knowledge upgradation and skill development in the country.

Since Learning & Development is very crucial for industries to enhance competitiveness in manufacturing, we empower the industry professionals and fresh engineers with the latest technological developments through various training sessions, workshops and seminars.

IMTMA Technology Centres are established in Bengaluru, Pune and Gurugram with the aim of catering to the requirement of the industry across India. While Bengaluru and Pune have both Productivity Institute and Design Institute, Gurugram hosts Design Institute.

Read More

Our Clients

Numbers and People Speak for Us


Man days


No. of Training Programmes


Training days






Feedback rating

Upcoming Programmes

Hands on Training on “Machine Tool Design – Special Purpose Machine (SPM)”

8 November to 31 December, 2021
IMTMA Technology Centre,Bengaluru

The course is structured with an introduction to Design fundamentals and more focused on machine tool design. Complete design of CNC Turning center will be carried out from concept to finish. Pre-process activities like design input, conceptualization, machine specification, 3D modeling of parts, sub-assemblies and final assembly using popular design CAD tools and preparing the final manufacturing drawings in par with industry standards, Design for Accuracy, Design for Manufacturing and Design for Assembly will be addressed during the course. It will be a highly interactive and hands-on training session and covers the entire 360° view on machine tool design aspects.

Read More Register


8 November to 4 December, 2021
IMTMA Technology Centre,Pune

Indian Machine Tool Manufacturers’ Association (IMTMA) is organizing an exclusive hands-on training course namely “ Finishing School in Production Engineering” at IMTMA Technology Centre, Pune.

Read More Register

Certified Root Cause Analyst

23 to 30 November, 2021
Online from 0910 Hrs to 1340 Hrs

Fundamental to any continuous improvement program is the ability to determine the root cause of an effect. Root cause is the fundamental, underlying reason for a problem.  The approach should be “Don’t put a bandage on a problem; fix the issue permanently”. Root cause analysis involves - deploying methodologies to understand the root cause(s) of a problem and verify the same. 8D and A3 problem-solving are universally deployed approaches that are structured to identify and verify the root cause in a scientific manner. This course will enable participants to understand root cause analysis as a procedure for ascertaining and analyzing the causes of problems in an effort to determine what can be done to solve or prevent them occurring again. RCA potentially leads to saving of time, money, and resources. Keeping this in view, IMTMA is organizing an Online program on “Certified Champion in Root Cause Analysis”. This course is designed to provide participants with an in-depth understanding of how to analyze a system to identify the root causes of problems thro “Learning By Doing” methodology.

Read More Register

Primer Course in Sheet Metal Forming

30 November to 1 December, 2021
Online from 1340 Hrs to 1700 Hrs

A big proportion of professionals working in Sheet forming have learn't the tricks of the trade and the do’s & don’ts the hard way, through years of painstaking experiential learning. The onslaught of new technology and materials in this domain has been so rapid that there is a dire need for a short capsule covering the basics, new technologies along with practical aspects of meeting the taller demands on quality and process performance. In order to address this requirement; Indian Machine Tool Manufacturers' Association (IMTMA) is organising a six hour online Primer course in Sheet metal forming. 

Read More Register

Hands-on training in Programming & Operation of CNC Machining Centres

6 to 10 December, 2021
IMTMA Technology Centre,Pune

CNC machines have become the order of the day in every manufacturing industry. These applications are wide spread in mass production units, batch production as well as in tool room industries. Thorough understanding of Programming and Operation of the CNC machines is a must in order to realize the maximum output. This programme will address the programming and operation of CNC Machining centres in detail including finer aspects like control of dimensions, surface finish and optimization of machining parameters. The procedure for safe running of the machine would be dealt along with autonomous maintenance practices. The participants will be trained hands-on in production CNC machines with real time machining exercises.

Read More Register

Mechatronics - Fundamentals and Core Concepts

6 to 10 December, 2021
Online from 1340 Hrs to 1700 Hrs

Mechatronics is an interdisciplinary branch of engineering that focuses on mechanical, electrical, and electronics engineering and also includes a combination of robotics, computer, and telecommunications systems. As we are aware any and every product these days is built with this interdisciplinary engineering science and built more intelligence to performing their output without or with minimum intervention of humans.This interdisciplinary concept brings up the importance of mechatronics, to prepare the engineers for these jobs, where they need to deal with mechanical, electrical, electronics and computers in product development of every domain.Mechatronics is a step beyond mechanization, which makes use of high control capability devices used largely for efficient manufacturing or production processes. In order to understand the development, integration, and functioning of such systems, an engineer needs to have focussed skills in working with mechanical & electrical systems, programming industrial controllers, working with sensors, actuators, and industrial communication systems. Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organizing a 5-day training programme on “Mechatronics – Fundamentals & Core Concepts”.

Read More Register

Our Partners

Contact Us

Drop us a line or give us a ring. We would love to hear from you.


IMTMA Technology Centre
(BIEC)10th Mile, Tumkur Road, Madavara Bengaluru - 562 123

Email :
Phone : +91 80 6624 6600


IMTMA Technology Centre
Plot no. 249 F, Phase IV, Udyog vihar Sector - 18, Gurugram - 122 015

Email :
Phone : +91 124 4014 101


IMTMA Technology Centre
12/5, D-1 Block MIDC Chinchwad
Pune - 411 019

Email :
Phone : +91 7066030531 / 532

Get in touch ( All fields are mandatory )

  Facebook   Twitter   Linkedin   Google Play   Apple Store   Get in touch
Our expert will get back to you as soon as he is free