:: IMTMA Training Centre ::

IMTMA Scheduled Programmes

IMTMA 2020 - 21 Calendar

| Jan to Mar Calendar - Pan India

February, 2020

Foundation Course in Industrial Automation and Robotics

10 February to 16 March, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Industrial Automation has become integral part of all modern manufacturing processes and is constantly upgraded keeping up with latest technological developments to ensure increased productivity with improved product quality. Increased use of automation also means requirement of engineers with adequate training in all aspects of industrial Automation and best manufacturing practices is highly crucial.

February, 2020

Machine Tool Design - Metal Cutting SPM

10 February to 4 April, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

The course is structured with introduction to Design fundamentals and more focused on machine tool design. A complete Design of metal cutting Special Purpose Machines will be carried out from concept to finish. Pre-process activities like design input, conceptualization, machine specification, 3D modeling of parts, sub-assemblies and final assembly using popular design CAD tools and preparing the final manufacturing drawings in par with industry standards, Design for Accuracy, Design for Manufacturing and Design for Assembly will be addressed during the course. It will be highly interactive and hands on training session and covers entire 360° view on machine tool design aspects

February, 2020

Design of Hydraulics System

17 to 21 February, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

The course is structured with the introduction to the basics of Hydraulics system to complete design. The design of Hydraulics is key to effective utilization of any Mechanical Application. Hydraulics design if not implemented correctly results in poor performance & quality problems during running. Conceptualization w.r.t the actual requirement in terms of force, speed and safety is very essential during design. Selection of hydraulic elements, sizing of elements, calculations for optimization, design of entire system is very vital in any mechanical industry. Assembly of hydraulic elements, hydraulic plumbing, machine interface and troubleshooting is a key requirement. The entire course is d

February, 2020

Hands on training in programming & Operation of CNC Turning Centre

17 to 21 February, 2020, 12/5, D1 Block, MIDC Chinchwad, Pune

CNC machines have become the order of the day in every manufacturing industry. These applications are wide spread in mass production units, batch production as well as tool room industries. Thorough understanding of Programming and Operation of the CNC machines is a must in order to realize the maximum output. Keeping this in view, Indian Machine Tool Manufacturers' Association (IMTMA) is organizing a 5 day programme on Hands-on Training in Programming & Operation of CNC Turning Centres on 17-21 Feb 2020 at Pune. This programme will address the Programming and operation of CNC turning centres in detail including finer aspects like control of dimensions, surface finish and optimization

February, 2020

Reliability engineering-Concept, Calculations, Techniques and Tools

18 to 20 February, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Reliability, Availability & Maintainability (RAM) are becoming very important aspects for the Product and Process Industries worldwide. The customers are well informed about the RAM’s requirements, and demanding certain target values for these probabilities. Considering the fact, that the Reliability Predictions are useful for the companies in the project bid stage itself to have a clear understanding of the design parameters and the goal setting gaps.

February, 2020

How to become an effective FMEA Practitioner as per combined AIAG & VDA Version

19 to 20 February, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

In today's competitive market environment, the industry has realized the fact that servicing unreliable products is a very costly proposition. To a large extent, reliability is built into the product during the design and development phase. Failure Mode & Effects Analysis (FMEA) is an essential ingredient of reliability engineering and is a very powerful and effective technique used for improvement in the methodology used for design, assembly, materials engineering, servicing etc., for a diverse range of products and processes. FMEA can be effectively applied in case of new developments, new technologies and components/assemblies or products which have inherent problems to anticipate & preve

February, 2020

BIW Welding Fixture

24 to 26 February, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

BIW Fixture Design. Body in White (B.I.W.) refers to the welded sheet metal components which form the vehicle's structure to which the other components will be married, i.e., engine, chassis, exterior and interior trim. Services: Designing of prototype and series production welding fixtures.

February, 2020

Hands-on Training in Spindle Assembly and Maintenance

24 to 29 February, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Spindle is the most sophisticated member in machine tool and plays a vital role for better performance, higher efficiency and responsible for quality of machined components and overall productivity. Assembly and Maintenance of spindle in Metal Cutting or Industrial Machinery is critical and skillful function. Engineers / Technicians involved in Assembly / Maintenance of spindles typically require special skills, specific tooling, a thorough knowledge of bearing applications with intense Training and relevant inputs.

February, 2020

Cost of Quality & How to reduce Cost of poor quality (COPQ)

25 to 26 February, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Cost of Poor Quality can make an organization lose 25% to 35% of sales amount due to variety of reasons like warranty, compliant servicing, scraps, redesign, resources and capacity loss due to rework and reprocessing, free replacement delivery, loss of management time, loss of orders, loss of interest in delayed payments and loss of customers. Cost is inversely proportional to Poor Quality. A quality complaint can lead to multiple ripple effects that can impact 10 X or more than just the replacement cost due to above reasons.

February, 2020

Effective Maintenance towards zero down time-Electrical aspects of CNC Machines

25 to 26 February, 2020, 12/5, D1 Block, MIDC Chinchwad, Pune

CNC machines are real Mechatronic systems, having electrical and electronic circuits interacting with mechanical actuators / sub systems. Diagnostics and root cause analysis is an important aspect of maintenance, which is most often ignored. Often the roots of a mechanical problem is in the electronics area and that of an electronic problem lies elsewhere. Thorough understanding of the CNC machine circuit diagram, Ladder diagram and CNC parameters is needed to find and fix the root cause to minimize MTTR (Mean Time To Repair) and effective planning of PMBF(Preventive Maintenance Before Failure) towards zero down time. Keeping this in view, Indian Machine Tool Manufacturers' Association (IM

February, 2020

Geometric Dimensioning and Tolerancing in Design through Manufacturing

25 to 26 February, 2020, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Geometric Dimensioning and Tolerancing (GD&T) system eliminates ambiguities in engineering drawings and brings out the designer's intent very clearly. It ensures seamless communication between design, engineering, manufacturing and quality teams across the entire organization enabling them to work in a concurrent engineering environment. Application of GD&T system helps to reduce the manufacturing and inspection costs drastically.

February, 2020

Maintenance & Trouble Shooting of presses

25 to 26 February, 2020, 12/5, D1 Block, MIDC Chinchwad, Pune

The focal point and workhorse of the sheet metal shop is the press and maintaining a reliable press system is essential to face the fierce competition faced by today's press shops. In metal stamping, everything from poor quality parts to accelerated die wear and damage often is caused by poor maintenance. Many fabricators rely on ad hoc maintenance when a machine goes down, with all available resources focused to fix the problem. This approach works most of the time, but at a high cost. Whereas adhering to a press maintenance program leads to cost reduction by decreasing downtime, enhancing machinery output, and establishing a formal record-keeping system for ongoing inspections. Preventiv

February, 2020

"Finishing of Edges-Burr Management in Machining"

27 to 28 February, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

As long as there has been metal cutting, there have been burrs—an unwanted side effect of the process. Barring a revolutionary change, burr formation will always be a problem. With a few exceptions, conventional machining techniques always produce burrs. Burr prevention requires both conventional and non-conventional approaches. However, even when burrs are not produced, sharp edges left at the end of the machining process generally are not acceptable and require edge treatment. Burr removal represent unnecessary cost to the industry in various forms such as additional manufacturing, compensation, service, recall, and spoiling of the company image. Therefore, in most cases, it is a must ei

February, 2020

Manufacturing Automation using Robots

27 to 28 February, 2020, 12/5, D1 Block, MIDC Chinchwad, Pune

ROBOTS have been proven to deliver a host of benefits in a wide variety of manufacturing applications. Industries introducing robots to their production processes have typically seen a significant transformation in their productivity and efficiency, with higher levels of output, product quality and flexibility amongst the many other improvements. Though the robotic revolution in India is driven by the automotive industry, other applications like – machine tending, foundry, medical components processing, etc., are also growing.

March, 2020

Basics of Mechanical Design

2 to 6 March, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Programme is focused on developing the basic design skillsets for design engineers to enhance their efficiency and productivity. The programme will focus on design fundamentals which are most important for any design engineers working in any Industrial sector. Systematic and quantitative design engineers play a very vital role in product design. It will be a highly interactive training session and covers the entire 360° view on Basic machine design aspects.

March, 2020

Managing Capital Expenditure for Machinery & Equipments

2 to 3 March, 2020, 12/5, D1 Block, MIDC Chinchwad, Pune

Most Indian MSMEs consider CAPEX as avoidable expenditure rather than strategic investment. Either it gets decided by sporadic “opportunity deals” or it gets restricted to majorly “sustenance” at minimal cost, that too when there is no alternative. Often the decisions, intent and integration of CAPEX investments towards ensuring eventual Business Outcome also gets left to the top leadership. This tends to makes it unfair and ineffective way of managing CAPEX. Barring professional island of “Corporate Planning”, rest of the organization is neither aware nor competent to manage CAPEX. Considering this vital need; IMTMA is organizing a 2 day Seminar at Pune on “Managing Capital E

March, 2020

Hands-on Training in 5-Axis programming in CNC Machining

2 to 6 March, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Machining technology is progressing quickly, with advances in hard milling, high speed machining, chip thinning, live tooling on lathes, and many more. 5 axis Machining Centres form the latest in the series providing infinite possibilities as to the part sizes, shapes and complex profiles which cannot be machined in a single set up. Its multi directional approach to cutting tool ensures increased productivity, highest accuracy, rigidity and improved surface finish. 5 axis machining will enable single set up machining of sophisticated design components having widespread applications in aerospace, die/mold, energy and automotive sectors.

March, 2020

Hands on Training in Robot Programming

3 to 5 March, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Robots have been proven to deliver a host of benefits in a wide variety of industrial applications including Material handling/Assembly, Arc / Spot welding, Painting, Deburring, Plasma cutting etc. Industries introducing robots to their production processes have typically seen a significant transformation in their productivity and efficiency, with higher levels of output and consistent product quality. Yet another advantage with Robots is the flexibility in automation as they can be re programmed, whenever new products are launched.

March, 2020

Automated Productivity Measurement

4 March, 2020, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Industry 4.0 envisages the integration of the cyber world and physical systems. Automation of information is one key element that will result in quick and accurate decision making.

March, 2020

Sheet Metal Forming - Primer Course

5 to 6 March, 2020, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

Metal forming technology, over the last few decades has gradually revolutionised and redefined concepts of manufacturing quality products at lower cost, both in high and low volumes, leading to greater flexibility in manufacturing of finished goods. Recent processes have stretched the technology frontier to greater lengths, providing a competitive edge to corporations in the business of manufacturing.

March, 2020

Finite Element Analysis and Optimization

9 March to 18 April, 2020, 12/5, D1 Block, MIDC Chinchwad, Pune

The Finite Element Analysis is a powerful engineering analysis and has been widely used in engineering since 1950. The course “Finite Element Analysis and Optimization” is a 6 weeks comprehensive programme for fresh mechanical engineers who are aspiring to build their career as CAE Expert in product manufacturing domain.

March, 2020

Geometric Dimensioning and tolerancing in design through manufacturing

10 to 11 March, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

March, 2020

Practical Approach Towards Implementing Industry 4.0 in Manufacturing

12 to 13 March, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

Industry 4.0 or “Smart Manufacturing” has become a buzzword in any International Conference and Trade Fair related to Manufacturing in last few years, covering the holistic-automated-integration of machine / process monitoring with production plan, logistics, vendor processes to Business Level ERP for real time communication and control of overall performance. All major economies are pursuing this concept vigorously and soon it could become a standard norm for Industry operation rather than an option.

March, 2020

Advanced Product Quality Planning and Control Plan

13 to 14 March, 2020, Plot No. 249 F, Phase IV, Udyog Vihar, Sector 18, Gurgaon

New Product Development assumes lot of significance and has become very much essential for sustaining business growth of industries. However often many costly mistakes and time delay happen in new development of Products / Parts as well as processes.

April, 2020

Finishing School in Production Engineering

2 to 30 April, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

The Indian manufacturing sector has become major destination for global players not only for their manufacturing activities but also for marketing their latest developments specially in the field of CNC technologies. However, increased use of CNC machines / CNC automation doesn’t result in enhanced productivity directly. Systematic training in best manufacturing practices is highly crucial and well trained manpower can bring in significant improvement in productivity and quality levels thereby increased profitability. Amidst the competitive work environment today, Effective utilisation of resources including CNC machines, tooling, work holding and other accessories is the key to realise ev

April, 2020

Machine Tool Design – General Purpose Machine (CNC)

6 April to 30 May, 2020, BIEC, 10th Mile, Tumkur Road, Madavara Post, Bangalore

The course is structured from Design fundamentals to final machine tool design. A real-time project will be carried out from concept to final design. Design Concept, 3D Part Modeling, Assembly Modules, CAD Tool, and Manufacturing Drawings Accuracy, Design for Manufacturing and Design for Assembly will be addressed during the course. It will be highly interactive and hands-on training sessions.

April, 2020

Finishing School In Production Engineering

13 April to 11 May, 2020, 12/5, D1 Block, MIDC Chinchwad, Pune

IMTMA Training Centre

IMTMA Scheduled Programmes

Get in touch